Water quantity measurement system (WQMS) is designed for automated measurement of water flow and volume. WQMS can use various types of flow measuring devices: whirling, turbine, ultrasound, electromagnetic.
Crude settling drum, volume up to
The three-phase separator, volume up to
The unit is designed to carry out the following process operations: formation water treatment (separation of gas, oil, organic substances, colloidal clay, and other suspended materials); intake and dosed supply of chemical agents.
Oil quality and quantity measurement system (OQQMS) is a combination of the main and auxiliary equipment and measurement devices designed for producing signals on the measurement data in a form suitable for the automated and manual processing and transfer to the control system.
Electrical dehydrator, volume up to
Gas quantity measurement system (GQMS) is designed for automated measurement of flow, volume and composition of the pumped gas. GQMS can be classified into categories and classes depending on their capacity and location taking into account the most optimal technical and metrological conditions.
The units are designed for degasifying of non-foaming oil and associated oil gas treatment. They are used in gathering and treatment units for oilfield products.
The unit is designed for treatment of formation water of Aptian- and Albian-Cenomanian horizons without oil and colloid suspended substances or mechanical impurities and its supply at excess pressure to cluster pumping stations of the reservoir pressure maintenance systems.
The gas separator is designed for dropping liquid separation from gas mixture.
Установки предназначены для обезвоживания и обессоливания нефтяных эмульсий, и подготовки товарной нефти. Представляют собой блочно-комплексные автоматизированные установки.
The tank is designed for drainage and storage of light and dark oil residues, crude oil, oils, and condensate including water mixtures from process lines (pipelines) and equipment during repair of plants at oil refining, petrochemical and gas processing enterprises.
The unit is designed for separation and filling of truck tanks with products of oil wells on the multiple well platforms. The main purpose of the unit is to separate oil to a saturated vapor pressure of about
The mobile unit of oil separation and pumping is designed for automated measurement of delivery of oil and gas production wells at different pressure, operating both for the oil-gathering stations and for utilization of associated gas in the flare system.
The tank is designed for condensate drainage including its mixtures with water, from process lines (pipelines) and equipment during repair of plants at oil refining, petrochemical and gas processing enterprises.
The unit is designed for oil and gas wells surveying with the purpose of preparation of source data for oil, gas and condensate supply calculations as well as performance characteristics of systems.
The unit is designed for gas preparation, gas pressure reduction and maintenance at the outlet from the unit at a level set for the gas supply of consumers.
The unit is designed for gas preparation, gas pressure reduction and maintenance at the outlet from the unit at a level set for the gas supply of consumers as well as for gas condensate separation and treatment from the well production for further transportation to the place of storage or processing.
The modular compressor station is designed for gas compression, initial inlet pressure of at least 0.1 MPa g., with its further supply to the consumer.
Gas distribution plant is designed for gas preparation, gas pressure reduction and maintenance at the outlet at a level set for the gas supply of consumers.
The modular compressor station is designed for gas compression with its further supply to the consumer.
Unit of saline salution preparation for well-killing is designed for production of saline solutions with various specific gravity free from all solids and suspended particles (with a diameter of over 5 micron) harmful for the oil formation.
The station is designed for gaseous nitrogen production from the atmospheric air with concentration from 90 to 99.9999%, at the place of consumption, for purging purposes and for fire extinguishing systems of the customer.
Gas-fueled reciprocating power plant (Jenbacher) is designed for decentralized power supply of facilities with heating and electrical energy at the place of their location.
Unit of saline salution reconditioning of the following process operations: saline solution treatment (separation of oil products, organic substances, colloid clay and other suspended materials); pumping of the treated solution to the local station for its weighting up and repeated use.
Diesel power plants are designed for decentralized power supply of facilities with electrical energy at the place of their location; for work with isolated load or network, with a single unit or parallel units.
The unit is designed for treatment of the liquid for killing wells in order to separate it from suspended particles and mechanical impurities of various origins. The unit is installed on mud stations designed for preparation of liquid for killing wells.
Pig traps designed for installation on the main and field gas pipelines are used to periodically send and receive pigs and various scraping tools inside the pipes.